Welcome to Shenzhen Anycon Electronics Technology Co., Ltd !

How to Set up Set-top Box Remote Control


Top box remote control setup steps:
1. Hold down the set-top box remote control to the "Settings" button and hold for 2 seconds, LED (light) from dark to light enters the learning state;
2. Click on the set-top box remote control to learn the key LED (light) flashes, then in learning the receiving state;
3. The set-top box remote control and the TV remote control transmitter and head aligned in a straight line distance of about 1 to 3cm, press the TV remote control button and hold for about 1 second release;
4. After successful learning set-top box remote control LED (light) rapidly flashes three times remain long after the light, you can select another button to learn to learn again;
5. To learn other keys, repeat steps 2-4 several times;
6. study completed by set-top box remote control "Settings" button to save and exit the learning state, LED (light) turns off.
Note: You must keep the two stable learning remote control operation, shall shake
a) learning two remote control transmitter head must have been in the same line, and the distance is less than 3cm;
b) after entering the learning function if you do not select the button within 14 seconds will automatically exit the learning status, select the button to learn if not within 14 seconds will automatically exit learning state;
c) In the study key state election and waiting to receive the signal state can press the Set button to exit the learning function.
d) learn the same key repeatedly, up to two continuous learning, learning the same button twice in a row after not immediately able to select this button to learn, this key will save more than two consecutive study data; but in other key learning or re-enter the learning function can re-select this button to learn, learning to learn will overwrite the previous code.

Keywords:How to Set up Set-top Box Remote Control
linkedin share pinterest share Facebook share twitter share gplus